Bowflex TreadClimber TC100 Assembly & Owners Manual page 50

Troubleshooting
Speed displayed is not accurate
Walking belt misalignment
Speed dependent grinding or
scraping noise
Hesitation or belt slipping when
walking on unit
Knocking noises when unit is
operating
Things to Check
Outlet
Power cord not plugged in
Power switch turned off
Safety key not plugged in
If problem persists
Display set to wrong unit of mea
Walking belt tension
Igus bushing
Shock bolts
Safety key
Motor overload
Outlet
Safety Key
Assembly / Owner's Manual
outlet.
position. Switch will light up red to indicate power is present.
Contact Customer Service.
treadles.
user's stride. If belt is tracking to one side far enough to cause rubbing
walking belt.
Contact Customer Care for further assistance.
procedure.
Check and tighten both upper and lower bolts that connect the shocks
to the unit.
to shut power down to protect motor. Consult belt lubrication schedule
restart unit.
Outlet may not have enough power available for the machine due to
and restart machine.
Insert Safety Key into Safety Key Port on Console.
ton to exit the notice.
assistance.
Contact Customer Service for further assistance.
50
Solution
Emergency Stop Procedure in Safety