(6)
Take off the rear cover.
P.2-22 "[J] Rear cover"
(7)
Disconnect 1 connector (optional damp
heater). Release the harness from the har-
ness clamp.
(8)
Take off the drawer of the equipment and
PFU drawer.
(9)
Remove 1 screw and take off 1 fixing brack-
ets on the front left side.
e-STUDIO163/203
OUTLINE OF THE MACHINE
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 32
Fig. 2-47
Fig. 2-48
Fig. 2-49