[C] Exit roller
(1)
Take off the fuser roller unit.
P.13-11 "[B] Pressure roller unit / Fuser
roller unit"
(2)
Release the latch and take off the gear-A.
(3)
Take off the gear-B.
(4)
Remove the bracket.
e-STUDIO163/203
FUSER / EXIT UNIT
Gear-A
Gear-B
Bracket
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
13 - 12
Fig. 13-9
Fig. 13-10
Fig. 13-11