Functions - Toshiba e-STUDIO163 Service Manual
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
9.3
Functions
1) Main motor (M3)
The main motor is a brushless motor which is controlled by control signals output from the MAIN
board. The driving force of the main motor is transmitted to the drum, developer unit, cleaner unit,
fuser unit and the rollers which transport the paper, via gears and timing belts.
2) Toner motor (M2)
The main motor is a DC motor which is controlled by control signals output from the MAIN board.
The driving force of the toner motor is transmitted to the toner cartridge via gears.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 3
9
e-STUDIO163/203
DRIVE UNIT
Advertisement
Table of Contents
