Toshiba e-STUDIO163 Service Manual page 101
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO163:
- Service handbook (235 pages) ,
- Service manual (222 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
[D] CIS home position sensor (S1)
(1)
Take off the original glass.
P.6-12 "[A] Original glass"
(2)
Remove 1 screw and take off the CIS home
position sensor with the bracket.
(3)
Release 2 latches, take off the CIS home
position sensor, release the harness from
harness clamp and disconnect 1 connector.
[E] Platen sensor (S2)
(1)
Take off the scanner top cover.
P.6-13 "[B] Scanner top cover"
(2)
Disconnect 1 connector, release 2 latches
and take off the platen sensor.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Bracket
Fig. 6-16
Connector
Fig. 6-17
Platen sensor
Fig. 6-18
6 - 15
06/04
CIS home position sensor
CIS home position sensor
Connector
e-STUDIO163/203
SCANNER
6
Advertisement
Table of Contents
