Table of Contents
Advertisement
Log Set Assembly: LOGS-750F
Models: SL-750F, SL-750F-LP, SL-7F
3
4
2
Figure 1.
CAUTION: Logs are fragile, handle with care. Log #1 (2298-700): Place Log #1 into position by holding it upright and
placing it onto the pins on the back of the basepan. See Figure 3. Log #1 will sit upright as shown in Figure 4.
HOLES FOR LOG LOCATION PINS
Figure 3. Log #1 - Bottom View
Log #2 (2033-709): Log #2 is used twice in this log set. Log #2 also has holes on the bottom side that will be used for
positioning them in the firebox. See Figure 5. Locate the two Log #2's and place them on the pins in the front of the firebox
as shown in Figure 6 and Figure 7.
Figure 5. Log #2 - Bottom View
54
1
4
2
Heat & Glo • SL-5F, SL-7F Installation Manual • 2499-980 Rev. L • 10/19
LOG PLACEMENT INSTRUCTIONS
1
3
3
2
Figure 2. Location of Log Placement Pins and Corresponding Log #'s
Figure 4. Log #1 in Position
Figure 6. Log #2 - First of Two in Position
LOG PLACEMENT PINS
(CIRCLED)
1
2
2
1
1
2
3
2
Advertisement
Table of Contents
