Heat & Glo SL-5F Installation Manual page 53

Hide thumbs Also See for SL-5F:
Table of Contents

Advertisement

NO LAVA ROCK IN BURNER SLOT
(INSIDE DASHED LINE)
Figure 11. Rock Jig Removed
Log #5 (2033-720): Log #5 is used twice in this log set. The left log is located by placing the "Y-Shaped" end on the locating
grooves of Log #3 and setting the other end on the flat area of Log #1. See Figure 9 to reference locations of flat areas and
grooves. Figure 12 shows the left side Log #5 in position. The right side Log #5 is located by placing the "Y-Shaped" end
on the locating grooves of Log #1 and setting the other end on the right side log #2. See Figure 12 and Figure 13. The log
should be approximately 1-1/2 inch from the end of Log #2. See Figure 14.
Figure 13. Log #5 (2nd of 2)
Figure 15. Logs-550F Installed
Heat & Glo • SL-5F, SL-7F Installation Manual • 2499-980 Rev. L • 10/19
4
3
Figure 12. Log #5 (1st of 2)
Figure 14. Log #5 Placement
LOCATING GROOVES
5
1
2
2297-983E
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-7f

Table of Contents