Precor C576i Service Manual page 63

4. Set the handlebar at its mounting position and hand start the mounting bolts removed in
step 3 that fasten the handlebar to the handlebar pivot. Do not tighten them at this time.
5. Slide the spacer into the stairarm connector and place a washer on each side of the spacer.
Position the handlebar and the stairarm connector at their mounting positions and hand start
the mounting bolt.
6. Securely tighten the handlebar to stairarm connector bolt. Replace the plastic cap on the
stairarm connector.
7. Torque the handlebar to handlebar pivot bolts to 150 inch pounds.
C576i Self Powered Elliptical Fitness Crosstrainer
Page 63