Giving Priority To A Scan Transmission Job - Sharp MX-2314N Operation Manual

GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
(1)
Print Job Scan to
Address Set Time
1 Broadcast 10:00 04/01 020/003 Connecting
2 10:05 04/01 000/001 Waiting
AAA AAA
3
BBB BBB 10:22 04/01 000/004 Waiting
2
10:30 04/01 000/010 Waiting
4 CCC CCC
(1)
Fax Job Internet Fax
Pages Status
Job Queue
1 Complete
1
Detail
Priority
Stop/Delete
(2) (3)
5-110
SCANNER/INTERNET FAX
Touch the [JOB STATUS] key (
Select the job to which you wish to give
priority.
(1) Touch the mode tab of the job to be given
priority.
(2) Touch the key of the job to be given priority.
(3) Touch the [Priority] key.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
).
Contents