Touch Panel - Sharp MX-2314N Operation Manual

TOUCH PANEL

This section explains how to use the touch panel.
Messages and keys are displayed in the touch panel display to enable various operations to be performed.
The [JOB STATUS] ( ), [HOME] (
• To enter text, see "ENTERING
• Touch the [JOB STATUS] key (
function in this manual.
• For details about the [HOME] key (
• Touch the [SYSTEM SETTINGS] key (
screens and procedures for using the system settings, see
SETTINGS".
When you operate the touch panel, do not accidentally touch areas in the touch panel that are not necessary for the intended
operations.
If touched, the machine may malfunction.
Using the touch panel display
Example 1
(1)
COPY IMAGE SEND
Job status screen.
Print Job Scan to
Job Queue Sets / Progress
1 Copy
2 Copy
(2)
3 Computer01
4 0312345678
(1) Mode select keys
Use these keys to switch between copy, image send, and document filing modes*.
* On the MX-2314N, the productivity kit is required. If the productivity kit is not installed, the mode used will be print
mode.
(2) Settings for each function are easily selected and cancelled by touching the keys on the screen with your finger.
When an item is selected, a beep will sound and the item will be highlighted to confirm the selection.
(3) Keys that are greyed out cannot be selected.
If you touch a key that cannot be selected, a double beep will sound.
), and [SYSTEM SETTINGS] (
TEXT" (page 1-70).
) to display the job status screen. For details, see the chapters for each of the
), see "HOME
) to display the system settings menu screen. For information on the
DOCUMENT
FILING
Fax Job
Status
Spool
020 / 001 Copying
Job Queue
Waiting 1 Complete
002 / 000
1
Beep
Waiting
002 / 000
Tone
Waiting
001 / 000
Detail
Priority
Stop/Delete
BEFORE USING THE MACHINE
) keys are also available on the touch panel.
[JOB STATUS] key ( )
[HOME] key ( )
[SYSTEM SETTINGS] key (
Display
SCREEN" (page 1-22).
"Common Operation
(3)
1-10
)
Methods" (page 7-4) in "7. SYSTEM
Contents