Sharp MX-2314N Operation Manual page 427

Fax/Special Modes
Program
3
Timer
Job
Build
Original
Count
Scan Internet Fax
Address Book
Original
Direct TX Exposure
Sub Address
Resolution
4
Special Modes
Address Review
File
Quick File
Preview
Fax/Original
Scan Size
Auto
5
2-Sided 2-Sided
Tablet
Booklet
Press the [BLACK & WHITE START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have
been scanned and then touch the [Read-End] key.
6
A beep will sound to indicate that scanning is finished.
The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan
size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be
changed.)
To cancel scanning...
Press the [STOP] key (
(2) (3)
OK
Dual Page
Erase
Scan
1
2in1 Card Shot 2
Mixed Size Slow Scan
Original Mode
File
Quick File
Fax USB Mem. Scan PC Scan
Auto A4 Auto
Scan: Send:
Auto
Standard
Auto Reception
Fax Memory:100%
(1) (2)
OK
100% Send Size
A4 Auto
Image Orientation
).
Select 2in1.
(1) Touch the [Special Modes] key.
☞
SPECIAL MODES
(2) Touch the [2in1] key so that it is
highlighted.
(3) Touch the [OK] key.
Touch the [Original] key.
Specify the orientation in which the
original is placed.
(1) Touch the appropriate [Image Orientation]
key.
If this setting is not correct, a suitable image may not be
transmitted.
(2) Touch the [OK] key.
4-82
FACSIMILE
(page 4-72)
Contents