Adjusting The Volume Of The Ringer; The Machine Starts Printing When I Try To Forward Data; Checking The Machine's Communication Record - Sharp MX-2314N Operation Manual

Adjusting the volume of the ringer

The machine starts printing when I try to forward data...

Before forwarding received fax data to a shared
folder, check that destination computer is turned on.
If the computer is not turned on, the machine
prints the received fax data. If data is being
forwarded to several computers, received data is
printed if even one of the computers is turned off.

Checking the machine's communication record

To check the machine's record of communication using the image send function,
follow the steps below to print the image sending activity report.
The image sending activity report is printed from the system settings
(administrator).
Touch the [SYSTEM SETTINGS] key
and then touch [List Print (Administrator)] - [Image Sending Activity Report]
to print the report.
If the ringing sound made when the machine receives a fax is too loud or too soft,
follow the steps below to adjust the volume.
The fax ringer volume is adjusted in the system settings (administrator).
Touch the [SYSTEM SETTINGS] key
touch [Image Send Settings] - [Fax Settings] - [Fax Default Settings] -
[Speaker Settings] - [Ringer Volume] in that order, and then select the
desired volume.
Destination
on the touch panel,
( )
8-7
TROUBLESHOOTING
on the touch panel,
( )
Turn computer on
Contents
Z
Z
Z
Z