Installing The Chassis; Rack Installation - Extreme Networks Alpine 3804 Hardware Manual

Installing the Chassis

The Alpine 3800 series chassis fits in standard 19-inch (48.26 cm) racks. Table 36 displays the height
measurements for the Alpine 3800 series chassis.
Table 36: Alpine 3800 chassis height measurements
Switch Model
Alpine 3808
Alpine 3804
Alpine 3802
The Alpine 3808 and Alpine 3804 chassis are shipped with a preinstalled fan tray. For your safety, due
to the increased weight of the chassis after components are installed and to prevent damage to the
equipment, we strongly recommended that you install the power supply and modules after you mount
the chassis in a rack.
The Alpine 3802 chassis is shipped with a preinstalled power supply and fan tray. For your safety, due
to the increased weight of the chassis after components are installed and to prevent damage to the
equipment, we strongly recommend that you install the I/O modules after you mount the chassis in a
rack.
NOTE
Mount the chassis in a rack before installing any switch components.

Rack Installation

To mount the Alpine 3800 series chassis into a standard 19-inch (48.26 cm) rack, you need the following
tools, equipment, and resources:
• Helper bracket (provided)
• A minimum of four appropriate screws to secure the helper bracket (not provided)
• If you have an Alpine 3808 or 3804, a minimum of eight appropriate screws (not provided) to secure
the chassis into the rack
• If you have an Alpine 3802, a minimum of four appropriate screws (not provided) to secure the
chassis into the rack
• # 1 Phillips screwdriver
• A minimum of two people to help install the chassis into the rack
Extreme Networks Consolidated Hardware Guide
Height
12 U
6 U
4 U
Installing the Chassis
135