Console Port; Gbic Ports; Front View Of The Summit24E2 Switch; Gbic Types And Maximum Distances - Extreme Networks Alpine 3804 Hardware Manual

Summit Switch Models
Figure 37: Front view of the Summit24e2 switch

Console Port

Use the console port (9-pin, "D" type connector) to attach a terminal and access the CLI via a serial
connection. Use the console port for local management.

GBIC Ports

The Summit24e2 switch provides two Gigabit Ethernet ports. All of the Gigabit Ethernet ports use SC
connectors. You can use the following GBICs in the Summit24e2 switch:
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LX70
• ZX GBIC
GBIC Media Types and Distances
Table 29 describes the media types and associated maximum distances for each GBIC type.
Table 29: GBIC types and maximum distances
Standard
SX
(850 nm optical window)
LX
(1310 nm optical window)
ZX
(1550 nm optical window)
ZX Rev 03
(1550 nm optical window)
LX70
(1550 nm optical window)
*Extreme Networks proprietary. Connections between two Extreme Networks 1000BASE-LX interfaces can use a maximum distance of 10,000
meters.
98
Media Type
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
62.5/125 µm multimode fiber
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
10/125 µm single-mode fiber
10/125 µm single-mode fiber*
10/125 µm single-mode fiber
10/125 µm single-mode fiber
10/125 µm single-mode fiber
Mhz•Km Maximum
Rating Distance (Meters)
400 500
500 550
160 220
200 275
400 550
500 550
500 550
– 5,000
– 10,000
– 50,000
70,000
– 70,000
Extreme Networks Consolidated Hardware Guide