Contec F&eIT Series User Manual page 8

Control method by controller connected
Control using the I/O address map
Control using the memory address map
Control via the Windows driver *
Control over the web
* The API-SBP(W32) is included in the development kit
DTK-SBxx(FIT)GY; the other drivers are bundled with each controller.
Control using the I/O address map
When connected to the box computer [BX-320 Series etc], the CNT24-2(FIT)GY can
receive I/O instructions directly from the controller module. For details, see Chapter 4
"Using the I/O Address Map".
Control using the memory address map
When connected to the I/O controller unit [CPU-CAxx Series], the CNT24-2(FIT)GY
can be accessed from the host computer over the network.
The CNT24-2(FIT)GY is assigned with its device ID in the memory managed by the
controller module. The application running on the host computer controls the module
by reading/writing the memory managed by the controller module. For details, see
Chapter 5 "Using the Memory Address Map".
Control via the Windows driver
For the functions and settings available when using the Windows driver, refer to the
reference manual and online help for each module.
Control over the web
You can monitor collected data and manage the log over the web. You can use your
familiar browser to easily make various settings. For details, refer to the reference
manual for the SVR-MMF2(FIT), SVR-MMF(FIT)GY.
CNT24-2(FIT)GY
ο
FIT Protocol
API-CAP(W32)
API-SBP(W32) ο
API-USBP(WDM)
Introduction
ο
ο
ο
ο ο
3