Contec F&eIT Series User Manual page 78

Notes!
- When connecting the Module to a controller module, the internal power
consumption should be taken into account. If the total current exceeds the capacity
of the power supply unit, the integrity of the operation cannot be guaranteed. For
further details, please see the Controller Module manual.
- Depending upon the specific controller module that is used, some of the functions
are not supported.
Table 6.2. Installation Environment Requirements
Parameter
Operating temperature
Storage temperature
Operating humidity
Floating dust particles
Corrosive gases
Line-noise
Line-Noise
Static electricity
resistance
resistance
Vibration
Sweep resistance
resistance
Impact resistance
Standard
CNT24-2(FIT)GY
0 - 50°C
-10 - 60°C
10 - 90% RH (No condensation)
Not to be excessive
None
AC line/2kV, Signal line/1kV (IEC1000-4-4Level 3, EN61000-4-4Level 3)
Contact discharge/4kV (IEC1000-4-2Level 2, EN61000-4-2Level 2)
Atmospheric discharge/8kV (IEC1000-4-2Level 3, EN61000-4-2Level 3)
10 - 57Hz/semi-amplitude 0.15mm, 57 - 150Hz/2.0G
80minutes each in X, Y, and Z directions
(JIS C0040-compliant, IEC68-2-6-compliant)
15G, half-sine shock for 11ms in X, Y, and Z directions
(JIS C004-compliant, IEC68-2-27-compliant)
VCCI Class A, FCC Class A, CE Marking (EMC Directive Class A, RoHS Directive)
Requirement description
System Reference
73