Table of Contents
Advertisement
7
When asked to select a port Click "Add Port"
8
Select "Digital RapidPrint Server (via TCP/IP)" from the Port Type
list.
9
Enter "E-Connect" in Port Name box and "192.0.0.192" in TCP/IP
Address box.
10 Click on the "Options" button and select "Other" under "Additional
Port Information
11 Enter "9100" in TCP/IP (or telnet) Port Number box
12 Click "OK" and then Click "OK"again.
13 Click "Next".
14 Enter "4860" when prompted to enter Printer Name.
15. When asked if you want this to be your default printer, select "No"
and click "Next".
16 When asked if you want to print a test page, select "No" and click
"Finish".
17 Select "Settings" from the Start menu, and "Printers" from the
"Settings" submenu.
18 Right click on 4860 and select "Properties".
19 Select the "Details" tab and click "New Driver" button.
20 Click "Yes" to the printer warning.
21 Select "Generic" from the "Manufacturers" list and "Generic / Text
Only" from the "Printers" list. Click "OK" and "OK again.
Quick Start Guide
39
Advertisement
Table of Contents
