Kodak 4800 Series Quick Start Manual page 10

5 We recommend two people lift the printer. Remove the assembled
printer and stand from the box. Save the boxes and packing
materials in case you need to ship the printer.
6 Check to make sure the media sensors are plugged into their
respective connectors on the right stand leg.
7 Attach the brackets for the dryer to the stand legs using four of the
size 8-32 screws. Orient the brackets as shown below. Note:
The legs are shown below without the printer head. Attach the
dryer brackets after the printer head as been attached and the
assembled printer removed from the packing box.
Quick Start Guide
9