Quick Start Guide
To perform color deadband compensation
1
With paper loaded, press Utility Menu/Calibration Menu/Color DB
Menu/Color DB Test.
The test pattern prints as shown below.
2
For each color, examine the vertical lines and select the straightest
lines. Note the compensation number at the bottom of the lines you
selected.
3
Existing compensation values are printed in the lower right corner of
the test pattern. If any of these differ from the values you selected,
enter new compensation values by pressing Utility Menu/
Calibration Menu/Color DB Menu/Left or Right. Then, select the
the stall for the color you want to change. Use the Next and
Previous option buttons to scroll to the desired compensation.
Note: You may select a value between the listed values.
To perform vertical color calibration
1
With paper loaded, press Utility Menu/Color Calib Menu/Vert.
Calib Test.
The test patterns print as shown below.
-3
32
68
60
0
-2
-1
Vertical head-to-head test pattern
52
44
Color
Black
1
2
3
4
Y
3
M
2
C
1
K