Table of Contents
Advertisement
Procedure
1
Open the
Operation
2
To start data recording, open the
Alternatively, simply select the red circle on the right side of the button.
The
indicator on the top bar changes its colour to reflect that recording
Record
is active.
On the EK80 you can record both RAW and processed data using the
and
Record Processed
to automatically record all data formats simultaneously. To synchronize the
recording functions, open the
Record Processed
by means of the
3
If you wish to reduce the size of the data file you are recording, click the middle of
the
Record RAW
The current file is closed, and a new file is automatically started.
4
To stop recording, open the
Alternatively, select the black rectangle on the left side of the button to stop the
recording.
Related topics
Testing the EK80 operational functionality, page 27
Secondary procedures, page 47
Selecting Replay mode
Replay mode allows you to play back previously recorded raw data. The EK80 can not
operate normally while in Replay mode. Neither transmission nor reception take place.
Context
All playback is controlled by the replay bar.
A
: Select this button to stop the playback.
Stop
: Select this button to start the playback, or to pause it.
B
Play/Pause
: Select this slider and move it sideways to adjust the replay speed.
C
Replay Speed
: The button shows you which file you are replaying. Select the button to
D
Replay File
open the
Replay File
401925/C
menu.
Record RAW
functions. It may be useful to synchronize these two functions
Record RAW
button is then inhibited, and you can start and stop all recording
button.
Record RAW
button to open it, and select
Record RAW
dialog box.
Secondary procedures
button, and select On.
button, and set
Synchronize
.
Split File
button, and select Off.
Record RAW
to On. The
55
Advertisement
Table of Contents
