Adjusting Signal Settings - Epson PowerLite 825 User Manual

■
Tint (video only)
Adjusts the balance of green to magenta in the image
(available only for component video or NTSC signals).
■
Sharpness
Adjusts the sharpness of the image.
■
Color Adjustment
Adjusts the color values. Select
the overall value from 5000 and 10000 °K. Or, select
to adjust the saturation values for each color.
Green, Blue
(Not available if
■ Auto Iris
Automatically adjusts the brightness according to the nature
of the image. Improves the depth and detail of dark scenes.
(Only available when
Color Mode setting.)

Adjusting Signal Settings

Although the projector normally detects and optimizes the input
signal automatically, you can use the Signal menu to make manual
adjustments. In addition to changing the position of the projected
image, you can correct tracking and sync for computer images, or
change the aspect ratio to widescreen format for video images.
1. Press the button and select the
Menu
You see a screen similar to one of those below. (The settings will
be different depending on the source you are projecting from.)
Computer image
Abs. Color Temp
is selected as the Color Mode setting.)
sRGB
or
Dynamic Theatre
Signal
Component video
. to adjust
Red,
is selected as the
menu.
Fine-Tuning the Projector
note
You can also use the remote
control's Auto button to
automatically reset the
projector's tracking, sync,
resolution, and position
settings. See page 28 for
details.
Composite video/S-video
91