Epson PowerLite 825 User Manual page 122

Solving Problems
122
6. Make sure the
Mirror Displays
The message
Not Supported
Make sure the correct
■
(see page 93).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600 1200) and the frequency or refresh rate is supported by
the projector (see page 138). If necessary, change your computer's
resolution setting.
Only part of the image is displayed.
■ Press the button on the remote control to select a
Aspect
different setting (see page 34).
■ If projecting from a computer, press the
remote control. Also make sure the image
correct in the Signal menu (see page 92).
Check the projector's
■
or , depending on the size of your computer's
Normal Wide
display panel.
■ Make sure your computer is not set to display an extended
desktop or dual display.
■ Press the button on the remote control to cancel the E-Zoom
Esc
function.
Make sure your computer's resolution setting is correct. Ideally, it
■
×
should be 1280 800 to match the projector's native resolution
for the PowerLite 826W, or 1024
85. If this option isn't available, select one of the other compatible
video formats listed on page 138.
You also may need to modify existing presentation files if you
■
created them for a different resolution. See your software
documentation for specific information.
checkbox is selected.
is displayed.
is selected in the Signal menu
Input Signal
Auto
Position
setting (see page 92). Select
Resolution
×
768 for the PowerLite 825 or
button on the
setting is