Epson PowerLite 825 User Manual page 101

■
Operation
Use this menu to enable the following functions:
Direct Power On
cable is connected (without pressing the
to have the projector turn off automatically if it is
Sleep Mode
idle (and no signal is received) for the amount of time you select
as the
Sleep Mode Timer
Lens Cover Timer
after 30 minutes when the A/V Mute slide is closed.
High Altitude Mode
projector above 4900 ft (1500 m).
■ Standby Mode
Select
Communication On
monitored over a network when it is in standby mode (the power
light is orange).
■
Standby Microphone
When the Standby Mode is set to
set Standby Microphone to
microphone connected to the projector even in standby mode,
when Power On Protect is off.
■
USB Type B
Select
USB Display
the projector's USB Type B port (see page 41). Choose
to use the remote control as a wireless mouse when your
Mouse
computer is connected to the
see page 42.
■
Language
Select the language to be used for the projector menus.
to have the projector start when the power
P
(1 to 30 minutes).
to have the projector turn off automatically
to increase cooling when you are using the
to enable the projector to be
Communication On
. This allows you to use a
On
to project your computer's display through
Computer1
power button).
, you can
Wireless
or port;
Computer2
Fine-Tuning the Projector
note
If Direct Power On is
enabled, the power cable is
connected, and a power
outage occurs, the projector
will start when the power is
restored.
Do not use the projector at
altitudes above 7500 ft
(2,286 m).
101