3. Adjust the
Sync
The image is too light or dark, or colors are incorrect.
Press the
■
Color Mode
page 36).
■
Try adjusting the brightness and color settings in the Image menu
(see page 90).
■
Try changing the
Brightness Control
page 94).
■
Check your computer display settings to correct the color balance.
The projector's lamp may need to be replaced. See page 106 for
■
instructions.
In the Image menu, select
■
to their defaults.
There is no sound, or the sound is not loud enough.
Press the
button on the projector or remote control to increase
■
the volume.
Make sure
■
A/V Mute
the remote control may have been pressed.)
Try adjusting the
■
Volume
page 94).
If you're using a DVD player or VCR or other video source, make
■
sure the volume is not turned all the way down or muted. Also,
make sure the cables are connected correctly, as described on
page 49.
Make sure you are using a "no resistance" audio cable.
■
setting to increase the image sharpness.
button to select a different color mode (see
in the Settings menu (see
to change the color settings back
Reset
is not enabled. (The
A/V Mute
setting in the Settings menu (see
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
button on
Solving Problems
125