5. Press the
button on the remote control, select the
Menu
menu, then press
Network
6. Choose
Network Configuration
7. Select the
Wired LAN
8. Choose
IP Settings
following:
9. Do one of the following:
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
If your network does not assign addresses automatically, turn
■
off
and enter the projector's
DHCP
, and
Mask
Gateway Address
.
Enter
and press
menu and press
Enter
and press
. You see a screen like the
Enter
IP Address
, as needed.
.
Enter
.
,
Subnet
Using the Projector on a Network
55