Epson PowerLite 825 User Manual page 96

caution
If you lose the remote
control, you will not be able
to enter the password. Keep
the remote control in a safe
place at all times.
Fine-Tuning the Projector
96
The default setting for the Password Protect function is
these steps to turn password protection on:
1. Press the button on the remote control for about five
Freeze
seconds. You see this screen:
2. Use the pointer buttons to set
Then press .
Enter
3. Press
Esc.
4. Select and press
Password
5. When you see a message asking if you want to change the
password, select
Yes
6. Hold down the
Num
numeric keypad to enter a four digit password. (The default
setting is 0000.)
7. When you see a confirmation message, reenter the password.
Then press the
Menu
8. To enable your screen logo, select
. Select and press
Enter On
When this feature is on, the logo appears whenever you turn on
the projector (if the
menu; see page 98). It also appears when you press the
button (if you selected the
Display in the Extended menu). None of the User's Logo features
in the Extended menu can be changed when the User's Logo
Protect function is enabled.
Power On Protect
.
Enter
and press .
Enter
button on the remote control and use the
button to exit the screen.
User's Logo Protect
.
Enter
is enabled in the Extended
Startup Screen
for the
Logo A/V Mute
. Follow
Off
to .
On
and press
A/V Mute
setting under