Connecting To A Digital Camera, Document Camera; Or Other Device - Epson PowerLite 825 User Manual

note
Use a cable less than 10 feet
long and connect the camera
directly to the projector.
Your projector may not
function correctly if you use
a longer cable or connect
your camera to a USB hub.
If you connect a USB hard
drive, make sure you use the
AC adapter to power the
hard drive.
Flash memory drives must
be formatted FAT 16/32,
and images can't exceed
4608 × 3072.
Connecting to Computers, USB Devices, and Other Equipment
48
Connecting to a Digital Camera,
Document Camera, or Other Device
You can connect a digital camera, document camera, USB flash
memory drive (thumb drive), or other device. Use the USB cable
specified for your device.
You can use the projector's Slideshow feature (see the EasyMP
Operation Guide for details) to present JPEG images.
1. Connect the flat end of the USB cable to the
port on the projector, as shown. You can connect a thumb drive
directly to the
Type A
Digital
Thumb
camera
drive
2. Connect the other end of the cable to your digital camera,
document camera, or other device.
The indicator light turns orange and then green when a USB
device is connected.
3. Press the button on the remote control or the
USB
button on the projector's control panel.
Search
If you connect a digital camera or USB storage device, you can use
the pointer and
move through your images.
USB port.
USB cable
Document
camera
buttons on the remote control to
Enter
USB
Type A
Indicator
light
Source