Agilent Technologies 5517B Operation And Service Manual page 37

Table 3-2 Table 4-12
3-21. shows the program steps used to modify in the HP 5501A Laser Transducer Operating
and Service Manual. The program uses the HP 10760A x-axis card to monitor the laser warmup.
Table 3-3 Table 4-13
3-22. shows the program steps used to modify in the system manual. The program is for a two-
axis system with the HP 1074f>A in 16-bit mode and using positive-true logic. The program uses the x-axis card to
monitor the laser warmup.
3-23. Tables 3-4 and 3-5 are complete listings of the modified versions of Tables 4-12 and 4-13 found in the HP
5501A Laser Transducer Operating and Service Manual.