Read These Notes First; Charger Pod; Radio Signals Between Handset And Base Unit; Mains Power Connection - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 4 Thursday, March 27, 2008 2:54 PM

Read these notes first

Choosing a site
The base unit and charger pod(s) should be placed on a
for the base
level surface, in a position where:
unit and
■ the mains adapter plug will reach an easily accessible

charger pod

230-V AC switched mains supply socket — never try
to lengthen the mains power cable
■ the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
■ it is not close to another telephone — this can cause
radio interference
■ it is not close to a sink, bath or shower, or anywhere
else where it might get wet
■ it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights TVs etc.
Radio signals
To use your handset and base unit together, you must
between
be able to establish a radio link between them. Be aware
handset and
that:
base unit
■ Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
■ Other solid structures, like walls, may reduce the
signal strength.
Mains power
IMPORTANT — The iDECT V2i base unit and charger
connection
pod must be used with the mains adapter supplied with
the unit. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
Make sure mains power to the base unit stays
switched on. The iDECT V2i needs electrical power
for normal operation; not just for charging the
batteries.
4