Switching On And Off; To Lock The Keypad - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 10 Thursday, March 27, 2008 2:54 PM

Switching on and off

To switch the
To switch the handset off (in case you need to
handset on
save battery power when the handset is away
and off
from the base unit):
Press the HANG UP button and hold it for more
f
!
than 2 seconds
! The display goes blank.
To switch the handset back on:
Briefly press the HANG UP button, or replace
f
!
the handset on the base unit or charger pod
! The display shows Searching.... and then when
it detects the base unit it will return to standby
mode.
Notes
■ When the handset is switched off, it can't be used for
making calls, including emergency calls.
■ When the handset is switched off, it won't ring for
incoming calls, but the base unit will ring. To answer a
call when the handset is switched off, you need to
switch it back on. It may take a few moments for the
handset to re-establish a radio link with the base unit.
To lock the Press the LOCK/* button and hold it for 2
*
!
keypad
second
! The display shows
To unlock the keypad:
*
Press the LOCK/* button and hold it for 2
!
seconds or replace the handset on cradle.
Note
■ Incoming calls can still be answered normally even if
the keypad is locked.
10
and Keys Locked