Table of Contents
Advertisement
All manuals and user guides at all-guides.com
1 . Operational notes
0
Electrical safety
DON'T let the Base unit get wet. Electrical equipment can cause serious
injury if used while you are wet or standing in water.
If the Base unit ever falls into water, DON'T retrieve it until you have
unplugged the power lead from the mains and the telephone line plug
from the telephone socket; then pull it out by the unplugged cables.
NEVER use your
iDECT X2
i outdoors during a thunderstorm - unplug
the Base unit from the telephone line and the mains socket when there are
storms in your area. Damage caused by lightning is not covered by the
guarantee.
Locating the Base unit and charger pod
The Base unit and charger pod should be placed on a level surface, in a position
where:
the mains adapter plug will reach an easily accessible AC power outlet
-never try to lengthen the mains power cable.
the telephone line cable will reach your telephone line socket or extension
socket (Base unit only; charger pods have no connection to the telephone
line.)
it is not close to another telephone - this can cause radio interference
during calls
it is not close to a sink, bath or shower, or anywhere else where it might get
wet.
it is not close to other electrical equipment - fridges, washing machines,
microwave ovens, TVs, fluorescent lights, etc.
Radio signals between the Handset and the Base unit
To use your Handset and Base unit together, you must be able to establish a
radio link between them. Be aware that:
Siting the Base unit as high as possible will give better results - for example,
in a two-story house, the best position may be on the first-floor landing.
Any large metal object - like a refrigerator, a mirror or a filing cabinet -
between the Handset and Base unit may block the radio signal.
Other solid structures, like walls, may reduce the signal strength.
3
2
Advertisement
Table of Contents
