Troubleshooting - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 48 Thursday, March 27, 2008 2:54 PM

Troubleshooting

The iDECT V2i must be serviced by trained engineers.
NEVER attempt any repairs or adjustments yourself
— you could make the problem worse and invalidate
the Guarantee.
■ you have followed all the steps listed on pages 6 to 8
ALWAYS check
first that: to install and set up your iDECT V2i
■ all connectors are firmly inserted in their sockets
■ mains power is switched on at the socket
■ the handset's batteries are correctly and securely
installed, and are not run down
Everyday use
"I cannot make If the handset's display is blank, it may be switched off.
or answer calls."
Press the HANG UP
Check that the base unit's mains power adapter is
plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone —
not just for charging the batteries.
Make sure you're using the telephone line cable that
was supplied with your iDECT V2i. Other telephone line
cables might not work.
Move the handset closer to the base unit.
Check the Battery Level
it's low, replace the handset on the base unit or charger
pod to recharge the batteries.
Switch off the power at the mains socket, wait for a few
seconds and then switch on the power again. This
may help.
48
f
button to switch it back on.
symbol on the display. If