Using Reset - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 46 Thursday, March 27, 2008 2:54 PM
Custom settings
Note
■ If the PIN has been changed from the default 0000
already, at step 4 it will display
to key in the current PIN and press MENU/OK,
before the display shows

Using reset

The Reset command will restore the iDECT V2i to its
factory default settings. Use Reset with care because it
will clear the Phonebook, Caller ID and Redial
memories, and delete all answering machine messages.
1
To reset all Press the MENU/OK button
M
settings to
! The display shows
their defaults:
2
d
Press the
! The display shows
3
M
Press the MENU/OK button then the
ONCE
u
! Display shows
4
Press the MENU/OK button
M
! Display shows
been changed from the default 0000. (If the PIN
is still 0000 the display shows
you go to step 6.).
5 .
Key in the current PIN and press the MENU/
OK button
M
Display shows
!
6
Press the MENU/OK button
M
! You will hear a long confirmation beep.
7
Use the BACK button to exit the menu or press
B
HANG UP to go to standby mode
f
46
Enter PIN and you need
Enter New PIN.
Main Menu > Phonebook
D
button THREE times
Main Menu > Advanced Set
U
button
Advanced Set > Reset
Enter PIN if your PIN code has
Confirm Reset? and
Confirm Reset?