Registration Failed; To De-Register A Handset - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 57 Thursday, March 27, 2008 2:54 PM
Registration
If registration has failed, the handset's display will show
failed?

Registration failed

standby mode.
If this happens, try again, making sure you don't leave
too long between steps. If you still can't register the
handset, contact the Help Line for advice.
To de-register
You may need to do this in order to replace a
a handset
faulty handset.
You can de-register the handset you are
using. If you do this you will need to register
it again.
1 Press the MENU/OK button
M
! The display shows
2
d
Press the
! The display shows
3
M
Press the MENU/OK button then the
d THREE times
! Display shows
4
Press the MENU/OK button
M
! The display shows
The PIN is 0000 unless you've set a new one
(see page 45)
.
5 Key in the PIN and press the MENU/OK button
M
Help Line: 0845 345 9677
(Local Call rate)
for a few seconds then return to
Main Menu > Phonebook
D
button THREE times
Main Menu > Advanced Set
D
button
Advanced Set > Unregister
Enter PIN
57