Set The First Ring; Reset The Unit - iDect SOLO 5035+2 Owner's Manual

10.6

Set the First Ring

If you have subscribed to Calling Number Display (CND) service and do
not wish to hear the phone ring before the caller identification is
displayed, you can set the FIRST RING to OFF.
1. From the home screen, press
+
2. Press
+
3. Press
+
4. Press
A confirmation tone is played.
•
O
5. Press
10.7

Reset the Unit

You can reset your phone to its default settings with this feature.
Note: Upon reset, all your personal settings, call log and redial list entries
will be deleted and the phone will return to its default settings. However,
your phonebook will remain unchanged after reset. Also, if you have an
answering machine model, any recorded messages will remain
unchanged, while all other settings will be reset.
1. From the home screen, press
+
2. Press
+
3. Press
M
4. Press
• A confirmation tone is played and the unit is reset to its
default settings.
-
/ to ADVANCED SET and then press
-
/ to FIRST RING and then press
-
/ to select ON or OFF and then press
to return to standby mode.
-
/ to ADVANCED SET and then press
-
/ to select RESET and then press
again to confirm.
M
.
M
.
45
M
to select.
M
to select.
M
to confirm.
M
to select.
M
to select.