The Outgoing Message; To Record A New Outgoing Message - iDect V2i System User Manual

All manuals and user guides at all-guides.com
iDect_V2i_IFU_master.book Page 30 Thursday, March 27, 2008 2:54 PM
Answering machine setup
The outgoing
The telephone is supplied with two predefined outgoing
message
messages (OGM). One is for use in Answer Only mode
and one for use in Answer & Record mode.
■ Both of these can be replaced with your own pre-
recorded message if you prefer.
■ To pre-record an outgoing message you must first
follow the procedure to set the answer mode
To record a
After setting the answer mode you can choose
new outgoing
between using a predefined outgoing message
message:
or using a personalised one that you have
recorded. If you select
need to record a new message.
1
Follow steps 1 to 5 on page 29
! Display shows
2
d
Press the
press the MENU/OK button
M
! Display shows >
3
Press the MENU/OK button to play the existing
M
message
4
d
Press the
M
to record a new message
! Display shows >
5
Speak clearly into the handset
6
Press the MENU/OK button to end the
M
recording. Your message will play back
automatically.
! Display shows
7
M
If you are not happy with the result, repeat from
step 2.
30
Personalised you will then
Select mess. > Predefined
D
button to select Personalised and
Play message
D
button and the MENU/OK button
Record mess.
Select mess. > Personalised