Registration - iDect Z1 Series User Manual

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
1. Press <Menu> and <UP/DOWN> to scroll to Base Settings.
2. Press <Select> and <UP/DOWN> to scroll to BS Default.
3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000)
4. Press <OK> to confirm the PIN.
5. Press <OK> to confirm the base default reset.
Note: If the PIN code is entered incorrectly, "PIN Invalid" will display.

Registration

8.3
IMPORTANT: When you purchase an iDECT Z1/Z1i system, all handsets are already
registered to the base, so you do not need to register them. Handset registration is only
necessary when you buy extra handsets or if a handset has become faulty.
can be registered to a single base station.
If for some reason, the handset is not registered to the base station (<Antenna icon> is off),
register your handset according to the following procedure.
1. Press and hold <PAGE> on the base station for about five seconds
into registration mode. (The base in use LED will flash.)
2. On the handset, press <Menu> and <UP/DOWN> to scroll to Registration.
3. Press <Select> and <UP/DOWN> to scroll to the base station number you want to register
to. (The handset can be registered to up to 4 different base stations at one time. If the
handset is already registered to a base that base number will be displayed in bold.)
4. Press <Select> and enter the 4-digit system PIN.
5. Press <OK> to confirm the registration attempt.
If the handset registration is successful, you will hear a confirmation tone and it will return to idle
mode and the <antenna icon> will stop flashing. The handset will automatically be allocated the
next available handset number.
This handset number is shown in the handset display in idle mode.
2 2
Up to five handsets
to put the base station
.