10 Advanced Settings; Handset Registration; Register Additional Handsets - iDect SOLO 5035+2 Owner's Manual

10 ADVANCED SETTINGS

10.1

Handset Registration

IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if
a handset has become faulty.
You can register up to four handsets to one base station, with each
handset's number (1 to 4) shown on its display.
Note: Each handset can only be registered to one base.
You need to enter the Master PIN before you can register or unregister
handsets. The default Master PIN is 0000.
10.2

Register Additional Handsets

1. Press and hold the
seconds.
• The message indicator on the base will flash for up to 1 minute,
while it is in registration mode.
2. On the handset, press
+
3. Press
+
4. Press
• If no action is taken on the handset within 10 seconds, the
registration procedure will be aborted. If this happens, repeat
from step 1.
5. Enter the Master PIN and then press
Note: The default Master PIN is 0000.
• WAITING flashes on the screen.
• A confirmation tone is played to indicate successful registration,
and the handset will return to standby mode, with its handset
number displayed.
• If no base is found with the entered PIN, error tones are played
to indicate failed registration and the handset returns to
standby mode. You will need to repeat from step 1 above.
key under the base unit for approximately 5
-
/ to ADVANCED SET and then press
-
/ to REGISTRATION and then press
M
.
M
42
M
M
to confirm.
to select.
to select.