Set The Sos Number; Select Base Station; Reset Handset Settings To Default - iDect Z1 series User Manual

8.1.12.2 Set the call barring number
1. Follow steps 1 to 4 in Section 8.1.12.1
2. Press <UP/DOWN> to scroll to Barring Numbers.
3. Press <Select> and <UP/DOWN> to scroll to Bar Number 1/2/3/4.
4. Press <Select> and enter the number for the selected Bar Number.
Note: Each barring number can include up to 4 digits including "*" and "# ". Press <Clear> to
delete a digit or press and hold <Clear> to delete the whole barring number.
5. Press <OK> to confirm the number to be barred.
Note: If Barring Mode is set to On and Barring Number is programmed with at least one
number, your handset will check the first 4 digits of your dialing number with the
programmed barred numbers. If the dialing number matches with any one of the set
barred numbers, "Call Barred" will display and the call will be ended.
8.1.13

Set the SOS number

This function allows you to enter a number which is permitted to be called even when the call
barring function is enabled. You can program up to three 4-digit SOS numbers, to permit the
handset to dial any telephone numbers beginning with these digits, regardless of barred
numbers.
1. Press <Menu> and <UP/DOWN> to scroll to Handset Settings.
2. Press <Select> and <UP/DOWN> to scroll to SOS Number.
3. Press <Select> and enter the 4-digit system PIN. (Default 4-digit
system PIN is 0000).
4. Press <OK> to confirm the PIN
Note: If the PIN code is entered incorrectly, "PIN Invalid " will display.
5. Press UP/DOWN to scroll to SOS Number 1/2/3.
6. Press <Select> and enter the number of up to 4 digits for your selected SOS Number.
7. Press <OK> to confirm the SOS number.
8.1.14

Select base station

If your handset is registered to more than one base station, you can select which base station
to use.
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Select Base.
3. Press <Select> and <UP/DOWN> to scroll to your desired base station.
Note: An "*" is displayed next to the currently used base.
4. Press <Select> to confirm.
Note: If the selected base is found successfully, "Saved" will display, otherwise,
"Failed" will display.
8.1.15

Reset handset settings to default

You can reset your phone to its original default settings. After reset, all your personal handset
settings will be defaulted , but your phonebook, call list and redial list entries
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to HS Default.
3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000)
4. Press <OK> to confirm the PIN.
5. Press <OK> to confirm the handset default.
Note: If the PIN code is entered incorrectly, "PIN Invalid" will display.
20
remain unchanged.