Install Seat and Back Pads
1. Install screws and washers securing the seat pad to the seat frame assembly using an 8mm Allen wrench.
2. Install screws and washers securing the back pad to the seat frame assembly using an 8mm Allen wrench.
3. Install hole plugs to the seat frame assembly using a rubber mallet.
Test Unit For Proper Operation
Item
1
2
3
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Item
1
2
3
4
Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).
Page 26 of 34
Description
Seat Pad
Washer, Flat 3/8"
Screw, M10 x 1.5, 30mm
Description
Back Pad
Washer, Flat 3/8"
Screw, M10 x 1.5, 25mm
Hole Plug, 1"
Qty.
1
2
2
Qty.
1
2
2
2