Life Fitness Axiom Series Assembly Instructions Manual page 26

12. Install screws, washers, and locknuts securing the cable retainer cover plate to left cam assembly using an 8mm
Allen wrench and a 17mm wrench.
NOTE: Make sure the work arm is engaged in detent position "3" to easily access the screws.
13. Place pulley into the loop of the cable and pull it down into the head plate pulley bracket.
14. Install screw, washers, and locknut securing the pulley and routed cable to the head plate pulley bracket using an
8mm Allen wrench and a 17mm wrench.
Item
1
2
3
4 Cable Retainer Cover Plate
5
6
7 Nut, M10 x 1.5, Hex Nylock
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Item
1
2
3
4
5
6 Nut, M10 x 1.5, Hex Nylock
Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).
Page 24 of 34
Description
Cable
Cam Assembly, Left
Cable Retainer
Screw, M10 x 1.5, 50mm
Washer, Flat 3/8"
Description
Cable
Pulley, 3.5" OD
Head Plate Pulley Bracket
Screw, M10 x 1.5, 50mm
Washer, Flat 3/8"
Qty.
1
1
1
1
2
2
2
Qty.
1
1
1
1
1
1