Life Fitness Axiom Series Assembly Instructions Manual page 23

22. Select the appropriate language from the multilingual label sheet. Remove backing from multilingual label and
apply to the left and right slots in the front cap.
Install Work Arms
1. Slide left cam assembly and spacer onto the shaft of the left upper work arm assembly. Make sure the detent pin
on the work arm assembly is engaged in a detent position.
2. Slide shaft through the overhead frame assembly.
3. Place spacer washer and castle nut onto the shaft and install cotter pin.
NOTE: Make sure cotter pin routed through a groove in the castle nut and into the hole in the shaft of the upper
work arm assembly.
4. Place threaded cap onto the shaft of the left upper work arm assembly.
Item
1
2
Item
1 Upper Work Arm Assembly, Left
2
3
4
5
6
7
Page 21 of 34
Description
Multilingual Label
Front Cap
Description
Cam Assembly, Left
Spacer, Internal .653
Spacer Washer
Nut, Castle
Cotter Pin
Threaded Cap
Qty.
1
1
Qty.
1
1
1
1
1
1
1