12. Place guide rods with weight stack cushions into the holes at the bottom of the tower frame.
13. Lean guide rods outwards and slide weight stack down guide rods onto weight stack cushions. Slide head plate
assembly down guide rods and onto weight stack.
14. Tip guide rods back into an upright position in the tower frame. Compress guide rod housings onto the springs
and guide rods and fit up into the top of the tower frame.
Item
1
2
Item
1
2
3
4
5
Item
1
2
3
Page 18 of 34
Description
Guide Rod
Weight Stack Cushion
Description
Guide Rod Housing
Spring
Guide Rod
Head Plate Assembly
Weight Stack
(Weight Plates)
Description
Guide Rod Housing
Spring
Guide Rod
Qty.
2
2
Qty.
2
2
2
1
1
(16)
Qty.
2
2
2