15. Select the LBS (7.5) or KG (3.75) option of the increment weight cap. Press increment weight cap into the head
plate assembly.
16. Thread head plate pulley bracket through the jam nut and into the head plate bayonet. See
for details.
NOTE: Check proper thread engagement. To do so, attempt to pass a 7mm Allen wrench through the portal in the
head plate bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum
depth.
Page 19 of 34
Item
Description
1
Increment Weight Cap
2
Head Plate Assembly
Item
Description
1
Head Plate Pulley Bracket
2
Nut, M16 Hex Jam
3
Head Plate Bayonet
Incorrect Depth: Thread engagement not deep
enough.
Qty.
1
1
Cable Handling Guide
Qty.
1
1
1