Bacnet/Ip Communication Link; Wiring Guidelines - Trane Symbio 210 Installation, Operation And Maintenance Manual

BACnet/IP Communication Link

This subsection provides information on the following:
•
•
•
•
•
•
•
Electrocution and Fire Hazards with Improperly Installed and Grounded
Field Wiring!
Improperly installed/grounded field wiring poses FIRE and ELECTROCUTION hazards. To avoid
these hazards, the user MUST follow requirements for field wiring installation and grounding
as described in NEC and local/state electrical codes. All field wiring MUST be performed by
qualified personnel. Failure to follow these requirements could result in death or serious injury.

Wiring Guidelines

•
•
•
BAS-SVX084A-EN
Wiring Guidelines
Wiring Best Practices
Setting up the Symbio 210e Controller on a daisy chain BACnet/IP Link
Setting up the Symbio 210e Controller on a home run BACnet/IP Link
Setting the address
BACnet/IP Networks Without a Tracer SC System Controller
BACnet/IP Networks With a Tracer SC System Controller
Use CAT5 or CAT5e non-shielded twisted pair, Ethernet cable with RJ45 connectors for BACnet/
IP installations.
Cable length limit is 100 meters (328 feet)
Use daisy chain (Figure 6, p.
WARNING
20) or home run topology
Wiring Installation
(Figure 7, p. 20)
19