Controller LEDs
This section describes how to verify and interpret the Symbio 210 controller LEDs and safely
operate the controller. LEDs are used to provide controller serviceability. The Symbio 210 controller
has the following LEDs located on the front (refer to
•
•
•
•
For details about wiring communication links, refer to the BACnet Best Practices and
Troubleshooting Guide (BAS-SVX51-EN).
Figure 10. BACnet MS/TP Controller LEDs
27
Marquee LED
Communication status LEDs and IMC status LEDs
Service button LED
Five (5) TRIAC status LEDs
Figure
9,
Table 9, p.
28, and
Table 9, p.
27):
BAS-SVX084A-EN