Vise; Safety Precautions; Preparation And Inspection; Operation - JLG R4045 Operation And Safety Manual

SECTION 5 - ACCESSORIES
5.9

VISE

The Vise allows the operator to secure material for assembling, disas-
sembling, drilling, etc., while working from the platform.
1
1. Vise Assembly
2. Capacity Decal (Weight)
5-14
3. Attach Pins
NOTE: If the WorkStation is installed, it must be mounted to the oppo-
site side of the platform from the Vise.

Safety Precautions

THIS ACCESSORY AFFECTS THE OVERALL CAPACITY OF THE PLATFORM. REFER TO THE
CAPACITY DECAL AND ADJUST ACCORDINGLY.
• Do not drive machine with material in the Vise.

Preparation and Inspection

• Ensure the Vise is secured to the platform.
• Check for any missing or damaged components. Replace if
necessary.
• Check for loose nuts and bolts. If necessary, torque accord-
ing to the Torque Chart specifications in Section 1 of the
Service Manual.
• Replace any missing or illegible decals.
• Remove when not in use.

Operation

1.
Load material into the Vise.
2. Tighten the handle until secure.
3. Begin working.
31215942