Safety Precautions; Preparation And Inspection; Operation - JLG R4045 Operation And Safety Manual

Safety Precautions

MULTIPLE MATERIAL-HANDLING ACCESSORIES CAN BE INSTALLED BUT ONLY ONE
MAY BE LOADED AT A TIME UNLESS APPROVED BY JLG INDUSTRIES, INC.
THIS ACCESSORY AFFECTS THE OVERALL PLATFORM CAPACITY. REFER TO THE CAPAC-
ITY DECAL AND ADJUST ACCORDINGLY.
WHEN THE CARRIER TRAY IS LOADED, THE INCREASE OF AREA EXPOSED TO WIND
WILL DECREASE STABILITY. REFER TO THE DECAL FOR MAXIMUM PANEL SIZE AND
WIND SPEED.
• Ensure no personnel are beneath the platform.
• Do not exit the platform over the rails, or stand on the rails.
• Remove the tray when not in use.
31215942

Preparation and Inspection

• Ensure all components are secured to the platform.
• Check for any missing or damaged components. Replace if
necessary.
• Check for loose nuts and bolts. If necessary, torque accord-
ing to the Torque Chart specifications in Section 1 of the
Service Manual.
• Replace any missing or illegible decals.
• Replace any torn or frayed straps.

Operation

1.
Attach the carrier tray to the outside of the platform.
2. Load the Panel Carrier with material and secure with the
adjustable bracket.
3. Position the panel to its desired location.
4.
Remove the carrier tray when finished.
SECTION 5 - ACCESSORIES
5-13