Ground Emergency Stop Switch; Hourmeter; Overload Indicator (Lss) - JLG R4045 Operation And Safety Manual

Ground Emergency Stop Switch

Power is turned on by pulling the switch out, and is
turned off by depressing switch. A two-position, red,
mushroom-shaped emergency stop switch, when
positioned to ON with the key selector switch posi-
tioned to ground, furnishes operating power to the
ground control station key switch. In addition, the
switch can be used to turn off power to the function
controls in the event of an emergency.

Hourmeter

The machine is equipped with an hour meter to indi-
cate the number of hours the machine has been oper-
ated.
31215942
SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION

Overload Indicator (LSS)

The Overload Indicator indicates when the platform
has been overloaded. An audible alarm will also signal
when the platform is overloaded.
NOTE: If the Overload Indicator is illuminated, further
elevation will be prevented. Reduce the weight
in the platform to not exceed the rated workload indicated on
the capacity decal, then the controls will work again.
NOTE:
When ambient temperatures are below freezing, the LSS will
have a reduction in available capacity. This will trigger the LSS
before achieving the maximum allowable capacity.
3-7