3.14 Machine Lifting And Tie Down; Lifting; Fork Lift Pockets - Location - JLG R4045 Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION

3.14 MACHINE LIFTING AND TIE DOWN

Lifting

The machine may be lifted using a fork lift truck. Lift only using the
built-in fork lift pockets on the side of the machine, and only with the
platform in the stowed position. Adjust the width of the forklift truck,
lifting tines to properly fit the machine forklift pockets (refer to Figure
3-3.) Slide the forklift tines into the forklift pockets and carefully lift
machine.
The machine can also be lifted using a spreader bar and four equal
1704016 C
length straps or chains capable of supporting the full gross weight of
the machine (refer to Figure 3-4.) Lift only using the lifting lugs pro-
vided at the four corners of the machine. (See Section 6, Machine Specifi-
cations for machine gross weight).
Figure 3-3. Fork Lift Pockets - Location
31215942 3-23